Citrus King Premium Filler & Adhesive Remover for stone monuments, memorials, and granite.
INSTRUCTIONS FOR USE:
While CITRUS KING works on filler, emulsion and outdoor adhesives, it is recommended that you test a small area first.
FOR REMOVING FILLER, STENCILS, EMULSION OR ADHESIVES:
STEP ONE: Wet the entire adhesive surface with CITRUS KING. This may be done by spraying CITRUS KING over the
surface of the adhesive. Do not over apply CITRUS KING in this first step. Allow CITRUS KING to soak and penetrate for
10-20 minutes to soften the adhesive.
STEP TWO: Scrape the bulk of the softened adhesive from the surface with a scraper (razor scrapers are generally preferred).
This will help increase the coverage of CITRUS KING and reduce the amount of liquid generated, making final cleanup easier.
STEP THREE: If necessary, protect walls, drains, cracks and other flooring with an absorbent (rags, kitty litter, sawdust) to keep liquefied
STEP FOUR: Reapply CITRUS KING Filler & Adhesive Remover as in step one. Agitate with a short bristled brush or scrubber to fully lift and liquefy
adhesive residue from the monument. This liquid can then be absorbed with the absorbent and picked up for disposal.
STEP FIVE: Wash and rinse the Monument surface thoroughly. Allow to dry.
For WOOD surfaces, follow steps one and two, then apply CITRUS KING to rags and wipe the surface until clean. Clean remaining
residue with wash and water. Keep in mind that wood is porous and will soak up liquids, which could affect the performances of
new adhesives. Allow additional time to dry.
For SDS, please call us at 1-800-424-8045 or email [email protected]